webCoRE

The Z-Wave Plus outdoor smart switch from GE is a reliable, heavy duty controller for lighting and appliances exposed to weather and the elements. Natively compatible with SmartThings, its compact, all-black enclosure and short 7.5-inch power cord can easily be concealed behind foliage and rocks, or mounted to an exterior surface.

Automating lamps and other plug-in appliances in a smart home has never been easier than the SYLVANIA SMART+ 'Lightify' Zigbee power outlet. Natively compatible with Samsung SmartThings, simple design, and 30-second installation and pairing make this outlet out #1 pick for SmartThings wall plug control.

The garage door is a common roadblock for home automation, because garage door openers are “dumb”, expensive, and not something you'd want to break. Have no fear! If you pair a SmartThings hub with the Chamberlin MyQ Garage Door Kit, you can control your garage door remotely, and check its current status. You can even automate it using IFTTT and webCoRE.

This compact siren and strobe plugs directly into the wall outlet. It extends up about 3 inches, but, the device can be plugged-in upside down if necessary. It boasts a 105dB audio siren, with 5 different alert tones available to choose from. The bright LED strobe is a white light that can flash when triggered. No other customization can be done to the strobe light functionality.

What is webCoRE? webCoRE ("Community's own Rule Engine") is a free, 'rule engine', with advanced capabilities, for Samsung SmartThings; WebCoRE enables full customization of tiggers, automation flows, geo-fencing, and much more. While users can create their own scripts, no coding experience is required to get started. WebCoRE interprets...

The Logi Pop smart button is, by far, the most aesthetically pleasing IoT push button. However, this beautifully designed smart button requires an additional hub for basic remote operation. To achieve an experience comparable to a native SmartThings device, you'll need to use a custom device handler & smart app, on top of IFTTT web hooks.

For both standard and non-standard doors, or doors with decorative door handles, you should consider adding a deadbolt-only smart device to the door to enable remote control and access. A smart deadbolt is simply a locking mechanism that fits into the existing deadbolt cut-out in your door, and connects to the internet to allow for remote access and programming.

Once you've built your initial home automation network, you need to be able to control it! The default (and simplest) way to control Z-Wave and Zigbee devices is with a Samsung SmartThings hub. The SmartThings mobile app offers all of the basic functionality -...

As you grow your home automation network, the need for triggers and automation using contact sensors becomes commonplace. There are a wide variety of options, but the Visionic sensor costs less than $20 online, which was the lowest priced SmartThings-native contact sensor (at time of...

Already got your hub set up? Add some devices: Buttons | Sensors | Switches | Security Introduction to Z-Wave Z-Wave is one of two wireless communication protocols used by the SmartThings hub, and is generally the most common home automation network used in the USA. Z-Wave is the...