Released in early 2019, the new Aeotec NanoMote (Available on Amazon) comes natively compatible with Samsung SmartThings, in addition to other Z-Wave Smart Home Hubs. Offering 4 physical buttons, each with 2 touch-modes (short press & long press), the NanoMote is an upgrade to the Aeotec WallMote Dual and Quad button controllers. Comparatively, the NanoMote is significantly smaller; measuring about 2-inches by 2/3-inch.
Available on Amazon The idea behind MySmartBlinds is simple: place a small WiFi/Bluetooth servo motor, hidden inside the existing housing of your window blinds, to open, close, and adjust the angle of the slats manually, or on a...
The Z-Wave Plus outdoor smart switch from GE is a reliable, heavy duty controller for lighting and appliances exposed to weather and the elements. Natively compatible with SmartThings, its compact, all-black enclosure and short 7.5-inch power cord can easily be concealed behind foliage and rocks, or mounted to an exterior surface.
Fire safety is, arguably, one of the most important aspects to home ownership. Not only are you responsible for yourself, but also everyone else living in the home. If your home is not already equipped with hardwired smoke detectors, it's simple to add wireless smoke detectors to SmartThings (or any Z-Wave home automation system) for less than $50.
Manufactured directly from the makers of the Samsung SmartThings Hub, this simple, elegant, and affordable push button enables unlimited possibilities for smart home automation. With native device compatibility, this button takes about 30 seconds to pair to your hub. Simply open the app, tap "+Add Device" and select "Samsung SmartThings Button".
Automating lamps and other plug-in appliances in a smart home has never been easier than the SYLVANIA SMART+ 'Lightify' Zigbee power outlet. Natively compatible with Samsung SmartThings, simple design, and 30-second installation and pairing make this outlet out #1 pick for SmartThings wall plug control.
The garage door is a common roadblock for home automation, because garage door openers are “dumb”, expensive, and not something you'd want to break. Have no fear! If you pair a SmartThings hub with the Chamberlin MyQ Garage Door Kit, you can control your garage door remotely, and check its current status. You can even automate it using IFTTT and webCoRE.
This compact siren and strobe plugs directly into the wall outlet. It extends up about 3 inches, but, the device can be plugged-in upside down if necessary. It boasts a 105dB audio siren, with 5 different alert tones available to choose from. The bright LED strobe is a white light that can flash when triggered. No other customization can be done to the strobe light functionality.
Ring Motion-Activated Spotlight Camera The Ring Spotlight cam combines motion-activated security lighting with Wifi security camera. Similar to other Ring products, the Ring Spotlight Cam (Available on Amazon) is controlled and setup using the Ring mobile app, and can send push notification alerts to multiple...
Multisensor 6 Overview The Aeotec Multisensor (Available on Amazon) has six sensors combined into 1 small, 1.8" square plastic housing. When the Aeotech Multisensor is placed in a hallway or room, you can use the SmartThings app to monitor motion, humidity, temperature, light lux (brightness), UV,...
12Page 1 of 2